Getting started
How to set up your first event, step by step, in the words the app uses. It’s written for small historical events and large faires alike, and each step says who can do it.
1. Your accounts
We set up your organization with you, and make its first Organization Admin. They get an email invitation with a link to set a password. Then they sign in at app.lostatfaire.comwith their email and password.
There are three kinds of accounts, and each person sees only the events they’re assigned to.
- Organization Admin: every event in your organization. Only Organization Admins create events and export the organization's records, and they can set up any event.
- Admin (an event admin, shown as Admin in the app): runs the events they’re assigned to. As well as everything staff can do, an Admin can set up their own events (edit the event’s details and logo, and its categories, storage locations, setup lists, and disposal destinations), add and assign staff, dispose of items, reopen a closed report, undo a return, share the online report form, and send messages.
- Staff: your volunteers. They log found items, take lost reports, search, and hand items back.
If you’re a one-person group, you’re the Organization Admin, and the same account can do all of it. The Admin and Staff buttons at the top of the app switch between the admin screens and the screens volunteers use.
2. Your event
Who can do this: Organization Admins create events; Admins can edit their own events’ details and logo · You can try this in the demo.
In the admin area, open Events, then choose New Event. It asks a few things at a time: its name and description, its address, contact email and phone, and website, and itsEvent Start Date and Event End Date. The Time Zone follows your organization’s unless the event is somewhere else. Then choose where its setup starts from, check theReview Your Event, and choose Create Event.
- On Starting Setup, choose a previous event’s card to copy its setup lists, storage locations, and categories, or only the ones you choose on What to Bring.
- To start from a ready-made setup, on Starting Setup choose one of the cards underLost at Faire’s Templates, and choose Preview Template Contents to read what it holds first. On What to Bring, everything starts ticked, so you can take the whole template or untick the parts, categories, and storage locations you don’t want. It gives the event categories, storage locations, disposal destinations, and lists for that kind of event, which you can change afterward; later changes Lost at Faire makes to a template don’t reach events already made from it. The same choice is onNew Template.
- Organization Admins can also keep their setup in a template. Open Templates, chooseNew Template, and build its categories, storage locations, setup lists, and disposal destinations like an event’s; a template is never a real event, so it takes no items or reports and uses up nothing. On an event’s page, Save as Template turns its setup into one. Then onNew Event, choose its card on Starting Setup. The event gets a copy, so changing the template later doesn’t change events already made from it.
- A faire that runs several weekends is one event: start on the first weekend’s first day, end on the last weekend’s last day. A Single Event is up to 4 days in a row. A faire that runs several weekends is a Season. See Pricing.
An Admin can change an event’s details and logo later: open Events, choose the event, and choose Edit Details. An Admin can’t create an event, and can’t change the dates of an event that’s in its read-only period or has closed.
The dates decide when staff can work in the event:
- Set-up opens 28 days before the first day. From then your staff can log items and take reports.
- Wrap-up runs 30 days after the last day, to finish returns and disposals.
- Then 90 days of read-only, to look things up and export your records. After that the event closes, and your records are kept.
Need longer, or the wrong dates? Email support@lostatfaire.com.
3. Categories
Who can do this: Organization Admins and Admins · You can try this in the demo.
Open Events, choose your event, and open its Categories tab. Categories are the kinds of items you take in: keys, jewelry, garb, water bottles, IDs and cards. Choose New Category, or Copy Categories From Another Event. Each has:
- A Name, a short Description, and an icon, shown on the card staff pick from. A Parent Category makes it a sub-category. The online report form shows patrons only your top-level categories, with their descriptions, so keep those broad and clear.
- Requires a Sub-Type, if staff should always narrow it down.
- A Default Storage Location, suggested when staff log an item in it. A sub-type can have its own, suggested ahead of the category’s.
- Storage Instructions: how to tag and pack items in it, such as a string tag on a ring or the number on painter’s tape for a purse. Staff see them after printing the item’s tag, then choose where they put it. A sub-category without its own uses its parent’s, and a sub-type can have its own.
- Ask Staff to Confirm They Followed These, if staff should tick that they did before saving where the item went. It starts on for categories whose items hold personal details.
- Ask for a Name on Return, on for every category unless you turn it off. Handing back a toy or a water bottle rarely needs a name, while a phone, camera, or jewelry should have one. With it off, staff can still type a name, and the return shows No name recorded if they don’t.
- A Holding Period (Days): how long unclaimed items in it are held before they’re due for disposal (step 5).
A new category opens as soon as it’s created; open another by its name. There you add Sub-types (New Sub-Type) and Custom fields (New Field): the details to record for it, such as the card type or the name on an ID. A field can be text, a number, a date, a choice From a List, a color, a material, a size, an email address, or a phone number, and can be Required. Fields are asked when staff log a found item and on lost reports; turn on Found Items Only for one that only the person holding the item can answer, such as a serial number, so lost reports don’t ask it.
The choices for color, material, and size fields, and any list you make for a From a List field, such as Weapon type, are your event’s own. Find them on the event’s Setup lists tab, under Field lists: add, rename, reorder, or deactivate entries, turn off Allow Other Values so staff and reporters can only pick from the list, or choose Reset to Standard on a standard list to start over. One list can serve fields in several categories, and Copy From Another Event and templates carry your lists to the next event.
For IDs, cards, and wallets, turn on Items Hold Personal Details, and turn on Identifies a Person for a field like the name on an ID. Once those items are returned or disposed of, their photos and identifying details are removed automatically after the event. Also turn on Name Matching, so an item that carries a lost report’s name is a Strong Match. We suggest never recording a full card number.
4. Storage
Who can do this: Organization Admins and Admins · You can try this in the demo.
On the event’s Storage locations tab, choose New Storage Location for each place found items are kept: a tent, a shelving unit, a shelf, a bin. Give it a Name, its Container Type, and its Usage. Both are required, and start as your event’s defaults (a Shelf used At event), so change only the ones that differ.
- Locations nest. Choose Inside on the form, or use Add a location inside on a location already listed, to put a shelf in a unit in a tent. Moving a unit moves what’s in it.
- Turn on Grouping Only for a unit that only holds other locations, such as a set of drawers. Staff then choose a drawer, never the set itself, and the set can’t be a category’s default. It can’t be turned on while items are stored in it.
- The up and down arrows on each location set the order staff see them in.
- Edit a location to add a photo, which helps staff find the right shelf or bin.
- The choices for Container Type and Usage are your event’s own lists. On the event’s Setup lists tab, under Container types and Usages, add the names your volunteers use, rename or reorder them, choose Make Default on the one most locations use, and deactivate or remove the ones you don’t need. Each list ends with Other, which is always there. Typing a letter in the form jumps to the first choice that starts with it.
- For a faire that runs several weekends, give each weekend its own holding location with Usage set to Week 1 holding or Week 2 holding. A faire running more than two weekends adds a usage for each later one, such as Week 3 holding, so you know which weekend’s items are where.
- Copy From Another Event brings storage locations over from a previous event, along with the container types and usages they use.
- Storage instructions (step 3) can start from an example. On the Setup lists tab, under Storage instruction examples, add the wording your team uses, such as the string tag on a ring. On a category or sub-type, choose Examples beside Storage Instructions, then Use on one, and edit the text if you like.
Once both are set up, check them on the event’s Setup report tab: every category with its sub-types, custom fields, storage instructions, and default storage location, and every storage location, as tables you can print whole with Print Full Report, or a section at a time (Print Categoriesgives a short Concise list of each category’s sub-types, fields, and default storage location to go over on paper with your staff). Its Gaps list names categories with no default storage location and storage locations no category uses, and its Staff questions column shows what each category asks staff when they log an item, so you can trim what volunteers have to answer.
5. When nobody claims an item
Who can do this: Organization Admins and Admins · You can try this in the demo.
On the event’s Disposal destinations tab, choose New Destination for where unclaimed items usually go, such as a charity shop or a shred bin, with a Default Method. The up and down arrows set the order staff see them in, and Remove Unused clears out destinations no disposal has used. Together with each category’s holding period (step 3), this is how Lost at Faire knows what to do with what’s left.
Nothing is disposed of automatically. An Admin’s home screen has a Due for Disposal card, which lists items past or near the end of their holding period, with a Print Pull List to carry to the shelves. An item linked to an open lost report is never counted as due. Select the items and choose Dispose of Selected, then say where they went and how, choosing a method such as Donated / Charity, Destroyed, Discarded, or Other. The methods are your event’s own list: on the Setup lists tab, under Disposal methods, rename them (for your charity partner, say), add your own, or remove the ones you don’t use. Each disposal is recorded, so you know where every item went. An Admin can undo one.
The same screen has Held for collection: items kept for a reporter for more than 14 days, to follow up on.
6. Your staff
Who can do this: Organization Admins and Admins · You can try this in the demo.
There are two ways to add someone. In the admin area, Users has New User. Or, on the event’s Users tab, choose Create a User for This Event for a new person, or Assign an Existing User to add someone who already has an account. An Admin has no Users screen in the admin area, so uses the event’s Users tab, and can add Staff and Admin accounts at their own events but not Organization Admins.
- Give each person their own Name, Email, and Role (Staff, Admin, or Organization Admin).
- You don’t invent a password. Choose Email a Sign-In Link and they get an email with a one-time link to choose their own password; if they’re standing next to you, choose Show QR Code and Link and let them scan it with their phone. Or choose Set a Temporary Password and tell them what it is: they sign in with it and are asked to choose their own straight away. Either way, only they know the password they end up with.
- Assign each person to the events they work at. They see nothing from any other event. Change that any time from the person’s page in Users, or remove them from an event on its Users tab.
Forgotten password: the person can choose Forgot password? on the sign-in page, or you can open their account in Users and choose Reset Password, with the same two choices as above. Resetting signs them out on every device, and they choose their own new password when they use it. The account shows Waiting for first sign-in until they do.
Someone has left: open their account in Users and choose Deactivate Account. It takes effect right away, and their past work stays in the records.
7. The online report form
Who can do this: Organization Admins and Admins · You can try this in the demo.
Patrons can report something they lost from their own phone, without signing in, on a form for your event. Lost at Faire doesn’t put that form in front of patrons for you: you add its link to your own website, a post, or a sign. Patrons pick from your top-level categories (staff can refine the category when they work the report). Find it on the event’s Online form tab; an Admin’s home screen has an Online Report Form card that opens it.
- Direct link and QR code: copy the link, or choose Download QR Code to print it on signs and slips.
- Put the form on your website: pick the Theme, Corners, and Background, and optionally an accent color. Copy the Embed Snippet, and in your website builder add a “Custom HTML” or “Embed code” block to the page with it.
The form is open to patrons from when set-up opens until wrap-up ends. A patron who leaves an email address gets a confirmation with a status link, a private page that shows how their report is going. The link works until 30 days after your event ends. These reports appear in Manage Reports for your staff, filed as Online.
To make that confirmation sound like your faire, open the event’s Email wording tab. Admins and Organization Admins can change the greeting, add a paragraph (booth hours, say), and change the sign-off, preview the email, and send themselves a test.
The same tab’s Emails to reporters holds the emails admins send from a report’s contact log with Send an Email: item found, your status link, a reminder before disposal, and item returned, plus any you add. Fill in the Lost & Found details (where the booth is, and its hours) there too, since the item found email uses them. Each email sent is kept in the contact log, word for word, with whether it was delivered.
8. At the booth
You can try this in the demo.
Volunteers sign in from a web browser on a tablet, phone, or computer. On an Android phone or tablet they can also install the app to the home screen, from the Install note the app shows or Chrome’s menu, so it opens full screen. Saving an item or a report needs a connection at that moment. They choose the event from the Select event menu at the top if it isn’t already chosen, and then see the home screen: Create a Lost Item Report, Log a Found Item, Search Items, and Manage Reports.
- Operating procedures. An Organization Admin can write how the organization runs its lost and found under Operating Procedures in the admin menu, and each event’s admins can add a part for their own event. When the organization asks for it, each volunteer is shown the procedures the first time they enter an event and ticks I Have Read and Understood These Procedures before carrying on; the app records who confirmed what, and when. Anyone can read them again from Help.
- Sharing a tablet. A booth tablet passed between volunteers can switch people with a PIN instead of an email and password. On the tablet, open Shared Tablets in the admin menu and choose Set Up This Browser as a Shared Tablet, then pick who is on it and, if the tablet stays at one place, the report location it works at, so every lost report taken there starts at the right place. Each person sets their own PIN with Set a PIN on their account page and taps their name on the tablet;Switch User hands it to the next person, and an idle tablet locks itself. Badges are off to begin with: turn on Offer Print Badge in the event’s print settings, and a volunteer can print a badge with Print Badge to pick their name with the tablet’s camera. The admin area still asks for the password, and no face or fingerprint is ever collected.
- Where reports are taken. The last screen of a lost report asks How Was This Report Filed?, and your own places are the choices. Admins set them on the event’s Setup lists tab, under Report locations: a new event starts with Info Booth and Other, and you add a booth, tent, or kiosk for each place you take reports. The screen starts on the place that device used last. Reports from the online form are always filed as Online.
- Item tags. When an item is saved, the screen shows its tag number. Choose Print Tag to print it, and attach it to the item. The same button is on every item’s page. If your event doesn’t print tags, the button isn’t there and the screen says to write the tag number on the item. A printed tag carries a barcode of the tag number (or a QR code, if your admin chose one): with a handheld scanner, click the Search box on Search Items, scan the tag, and the item opens. Set the scanner to send Enter after the code.
- Printing. Admins choose how an event prints on its Setup lists tab, under Print settings: whether Print Tag and Print Slip are offered, the label or slip size, the Code Type on the tag, whether Print Label is offered for shipping labels, and the paper for admin reports. Each part has a print test button, such as Print Test Tag, so you can try your printer before the faire. The browser’s print dialog still picks the printer, and on some tablets you may need to confirm the paper there.
- Already in the inventory. While a volunteer describes what was lost, a box titled This May Already Be Here lists found items that might be it. If one is, choose Return This Item to hand it over without finishing the report: it asks for the person’s name (unless the category doesn’t), how you confirmed the item was theirs, and an optional note.
- Report slips. When a report is saved, the screen shows the reporter’s status link as a QR code to scan with their phone camera. If they left no email or phone, choose Print Slip so they have it.
- Messages. Admins use Messages to leave a note for the people working an event, such as a change of plans. Staff see a count on the Notifications icon at the top of the screen.
The booth sheet is a single page to print and keep beside the tablet. It covers signing in, logging an item, taking a report, searching, handing an item back, and what never to do, and has a space to write your booth lead’s name and phone number.
9. During and after your event
You can try this in the demo.
Handing an item back. Open the lost report in Manage Reports. Its possible matches are items that might be theirs, each marked Strong Match or Possible Match with what matched; Why This Score? shows the details, and Show Weaker Matches shows the long shots. Choose Link an Item to link one; a person on your staff always decides. Once you’ve confirmed the item is theirs, choose Return Item and say how you confirmed it (How You Confirmed It Was Theirs, such as Opened or unlocked it for a phone). If there’s no report, open the item and choose Return Without a Report. Either way the return is recorded on the item and the report. An Admin can Undo Return if it was a mistake.
Sending an item to someone who has gone home. On the report, open the Shipping section and choose Add Shipping Address, then enter where it goes (Save Address). The address is kept apart from the person’s own contact details. Choose Print Label for an address label to stick on the package (it is not postage, so buy and attach postage the way you do today). Once it’s in the mail, choose Return Item, switch to Shipped, pick the carrier, enter the tracking number (or tick Shipped Without Tracking), and choose Record Shipment. Leave Email the Patron on to send them the tracking details; they can also see the shipment on their status link, with part of their address hidden. If the email couldn’t be sent, the report offers Send Email Again. If you got it wrong, an Admin can Undo Return and you record it again.
Closing out. After your last day you have 30 days to finish returns and disposals (step 5), then 90 more days to look anything up and export your records. Everything is kept between events and is waiting when you come back.
Seeing how it went. An Admin can open the event’s Summary tab at any time, during the season or after it. Choose a Date Range (Whole Event, Event Days Only, or Custom Range) and Run Report to see how many items you logged and returned, where the rest are, your lost reports, what shipping cost, and your busiest days and hours. Run it again for fresh figures. Print Report prints it, and Download CSV on each table saves it as a spreadsheet. It holds totals only: no patron details, and nothing per volunteer.
Exporting your records. Only Organization Admins can export. Choose Export data in the admin area, or theExport Data card on the home screen. Pick the events, then Download Export for a set of spreadsheet (CSV) files. It includes reporters’ names, email addresses, and phone numbers, so store it securely. (Export data is turned off in the demo.)
Next event. Create a new event (step 2) and, on Starting Setup, choose the previous event (or a template) to bring your storage locations and categories with you.
10. Keeping devices secure
Who can do this: Everyone; Organization Admins and Admins set devices up for their volunteers
A phone, tablet, or computer that is signed in to Lost at Faire is a way into your event’s records. These tips keep it closed to everyone but the person working, and we’ll add to them over time.
- Lock the device and keep it up to date. Set a passcode, fingerprint, or face unlock on the device itself, let it lock when it isn’t being used, and install the system and browser updates when they are offered. These are the device’s own settings, not something inside Lost at Faire.
- Log out when you finish. Choose Log out in the header, especially on a computer other people use. It clears the lists and your name that the app saved on that device. Each person signs in as themselves, and nobody shares an account.
- Give a shared booth tablet a browser of its own, with no personal accounts signed in to it, and set it up under Shared Tablets as described in step 8. On a tablet set up that way the sign-in form asks common password managers to stay out of it, but browsers decide for themselves, so also turn off the browser’s own setting that offers to save passwords. That way one person’s password is never kept on the tablet for the next. Switch User and the lock button hand the tablet to the next person, and an idle tablet locks itself.
- If a device is lost, or someone else may have used it, change your password from your account page (choose your name at the top), or ask an admin to reset it from Users. Changing a password signs that account out everywhere and removes its PIN.
11. Getting help
If something goes wrong, read the version at the bottom of the screen (it is on the sign-in screen too). Once you are signed in, press it to open Version Details, then press Copy Version Details and paste it into your email with a few words about the problem.
Email support@lostatfaire.com and we’ll reply within one business day. On event weekends we answer as quickly as we can, but we can’t promise weekend replies. A Season includes a setup call with us to go through all of this together, and for large faires we can help set things up. See Pricing.
Not a customer yet? Try the demo to use Lost at Faire yourself with a made-up faire company, or request a demo and we’ll walk you through it.
